SD-VPN:L3 service: remote network: after deleting the configuration some of the remotegw are still shown in the arp table

add a tenant with a L3 service:
2CPE - remote network behind UNI2 on each CPE

traffic:
10 untagged packets from c1u1 (local host) to c2u2 remote host
10 tagged packets from c2u2 remote host to c1u2 remote host

performed the following test:
init_karaf
configuration
send traffic
delete configuration

looking at the arp table i see that the 1 arp entry of the 2 remotegw is still shown there - operational/neutronvpn:neutron-vpn-portip-port-data/

when i performed the same test with 4 CPEs than 3 out of the 4 remotegw were still shown

attached logs of the scenario with the 2 CPEs

config:
**************************************

IP_ADD_C1U1: 110.1.1.1/24
UNI_ID_C1U1: 111
HOST_IP_C1U1: 110.1.1.2
HOST_MAC_C1U1: 00:AA:AB:00:11:00

IP_ADD_C1U2: 110.1.2.1/24
UNI_ID_C1U2: 112
HOST_IP_C1U2: 110.1.2.2
HOST_MAC_C1U2: 00:AA:AB:00:12:00
GW_IP_C1U2: 110.1.2.250
GW_MAC_C1U2: 00:AA:AB:FF:12:00
REMOTE_NET_C1U2: 111.1.2.0/24
REMOTE_HOST_IP_C1U2: 111.1.2.2

IP_ADD_C2U1: 110.2.1.1/24
UNI_ID_C2U1: 121
HOST_IP_C2U1: 110.2.1.2
HOST_MAC_C2U1: 00:AA:AB:00:21:00

IP_ADD_C2U2: 110.2.2.1/24
UNI_ID_C2U2: 122
HOST_IP_C2U2: 110.2.2.2
HOST_MAC_C2U2: 00:AA:AB:00:22:00
GW_IP_C2U2: 110.2.2.250
GW_MAC_C2U2: 00:AA:AB:FF:22:00
REMOTE_NET_C2U2: 111.2.2.0/24
REMOTE_HOST_IP_C2U2: 111.2.2.2

**************************************