SD-VPN - Rate limit - no consistent - in the result .

This is the profile :
profile_name rate (KBytes) ps burst (bytes)
123123 5 0

Configuration :

87668 epl Point To Point amit1234
Device UNI VLANs (click to edit) Profile
CE 1 ens5 123123
CE 3 ens5

---------------------------------------------------------

c1u1 (limit of 5 KByte) to c3u1

result :

I ran the same test few times and every time I get different result :

Scenario:
send : 900 packets any packet in size: 250 bytes in rate (packet size) of 30,000 (bits ps) = ((250 * 8) * 15 ) = 15 packets per sec

We config 5 KB = 40,000 bits.

All the packets should be receiving to c3u1.
We verified that Traffic Gen send the packets in the rate of 15 packets per sec.

TX - traffic gen send the packets to port c1u1 (e1000:2 )
Rx- traffic gen get packets from port c3u1 (e1000:6 )

Test 1:

e1000:2 TX: 900P 225000B | 0 bit/s 0 PPS ( 0%) Latency: 0.000ms Avg, 0.000ms Max
e1000:6 RX: 769P 185201B | 0 bit/s 0 PPS ( 0%) Jitter: 0.000ms Avg, 0.000ms Max

Test 2 :

e1000:2 TX: 900P 225000B | 0 bit/s 0 PPS ( 0%) Latency: 0.000ms Avg, 0.000ms Max
e1000:6 RX: 559P 134563B | 0 bit/s 0 PPS ( 0%) Jitter: 0.000ms Avg, 0.000ms Max

Test 3:

e1000:2 TX: 900P 225000B | 0 bit/s 0 PPS ( 0%) Latency: 0.000ms Avg, 0.000ms Max
e1000:6 RX: 273P 65723B | 0 bit/s 0 PPS ( 0%) Jitter: 0.000ms Avg, 0.000ms Max

Test 4:

e1000:2 TX: 900P 225000B | 0 bit/s 0 PPS ( 0%) Latency: 0.000ms Avg, 0.000ms Max
e1000:6 RX: 259P 62356B | 0 bit/s 0 PPS ( 0%) Jitter: 0.000ms Avg, 0.000ms Max

Logs attached.