[CONTROLLER-1453] 3 # cluster : Pre-provision is not happening when the switch is connected with follower node

Duplicate — Thu, 19 Oct 2017 21:26:33 +0000

I found that pre-provision is not happening when the switch gets connected with follower node. But at the same time, when the switch is connected with leader node, switch gets all the flows.

I am seeing this issue in 3 # node cluster and build version is distribution-karaf-0.3.3-Lithium-SR3.zip

I tested this in following cases;

case 1: configure flows in leader node
-------------------------------------------

a. connect the switch in leader node – pre-provision is working
b. Connect the switch in follower node - pre-provision is not working

case 2: configure flows in either of follower node
---------------------------------------------------

a. Connect the switch in leader node – pre-provision is working
b. connect the switch in either of the follower node – pre-provision is not working.

here with I am enclosing
opendaylight-inventory-nodes-operational-follower-node (open it in notepad / winword)
opendaylight-inventory-nodes-config-follower2 (can open it in notepad /winword)
follower2 --(pcap file, open it in wireshark)
karaf.log (open it in notepad)

OpenDaylight JIRA

[CONTROLLER-1453] 3 # cluster : Pre-provision is not happening when the switch is connected with follower node